DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Outlets (Int) - Service Information >> Rear Power Outlet Socket >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT REAR NO. 1 POWER OUTLET SOCKET ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY842824Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Rear No. 1 Power Outlet Socket Assembly)

      Standard Resistance

      Tester Connection Condition Specified Condition
      A - 1 (AC2) Always Below 1 Ω
      B - 2 (AC1) Always Below 1 Ω
      C - 5 (GND) Always Below 1 Ω
      1 (AC2) - 2 (AC1) Always 10 kΩ or higher
      1 (AC2) - 5 (GND) Always 10 kΩ or higher
      2 (AC1) - 5 (GND) Always 10 kΩ or higher

      If the result is not as specified, replace the rear No. 1 power outlet socket assembly.

Diesel-Data.com