DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Drive Shaft / Propeller Shaft - Service Information >> REAR DRIVE SHAFT ASSEMBLY (for A25A-FXS) >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT REAR DRIVE SHAFT ASSEMBLY 
    1. Check that there is no excessive play in the radial direction of the outboard joint.
      GTY223263Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check that the inboard joint slides smoothly in the thrust direction.
    3. Check that there is no excessive play in the radial direction of the inboard joint.
    4. Check the boots for damage.
    5. Check whether each drive shaft dimension (A) is within specification.
      GTY649354Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Keep the drive shaft assembly level during inspection.

      Dimension (A)

      for LH Side 738.6 mm (2.42 ft.)
      for RH Side 813.6 mm (2.67 ft.)
Diesel-Data.com