DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim - Service Information (2 Of 2) >> Rocker Panel Moulding >> Removal [12/2019 - ] >> Procedure

Removal [12/2019 - ]: Procedure

  1. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY 

    Refer to REMOVAL [12/2019 - ] 

  2. REMOVE NO. 2 QUARTER PANEL SEAL 

    Refer to REMOVAL [12/2019 - ] 

  3. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY 
    1. Apply protective tape around the body rocker panel moulding assembly and doors as shown in the illustration.
      GTY912870Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape - -
    2. Remove the 9 clips and 2 screws.
      GTY899087Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 8 clips to remove the body rocker panel moulding assembly.
      GTY939602Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the 8 clips from the body rocker panel moulding assembly.
Diesel-Data.com