DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> Window / Glass - Service Information >> Window Defogger Wire >> Repair [12/2019 - ] >> Procedure

Repair [12/2019 - ]: Procedure

  1. REPAIR REAR WINDOW DEFOGGER WIRE (BACK WINDOW GLASS) 
    GTY429562Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *a Masking Tape
    *b Broken Wire
    *c Repair Point
    1. Clean the broken wire tips with a grease, wax and silicone remover.
    2. Place masking tape along both sides of the wire.
    3. Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).
      GTY102931Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Using a fine tip brush, apply a small amount of the agent to the wire.
    5. After a few minutes, remove the masking tape.
      NOTE:

      Do not use the rear window defogger for at least 24 hours after performing the repair.

Diesel-Data.com