DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats - Service Information (2 Of 3) >> Seat Memory Switch >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT SEAT MEMORY SWITCH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY919873Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a SET Switch
      *b M1 Switch
      *c M2 Switch
      *d Component without harness connected
      (Seat Memory Switch)

      Standard Resistance

      Tester Connection Condition Specified Condition
      3 - 1 M1 switch pressed Below 1 Ω
      M1 switch not pressed 10 kΩ or higher
      4 - 1 M2 switch pressed Below 1 Ω
      M2 switch not pressed 10 kΩ or higher
      2 - 1 SET switch pressed Below 1 Ω
      SET switch not pressed 10 kΩ or higher

      If the result is not as specified, replace the seat memory switch.

Diesel-Data.com