Data List / Active Test [11/2023 - ]
- DATA LIST
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTE:In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
- According to the display on the GTS, read the Data List.
Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Outer Mirror Control Switch (RH Select) Mirror select switch signal for RH mirror OFF or ON OFF: Mirror select switch off
ON: Mirror select switch R switch on- Outer Mirror Control Switch (LH Select) Mirror select switch signal for LH mirror OFF or ON OFF: Mirror select switch off
ON: Mirror select switch L switch on- Outer Mirror Control Switch (Surface Adjust Right) Mirror adjust switch signal (Right) OFF or ON OFF: Mirror adjust switch not pressed right
ON: Mirror adjust switch pressed right- Outer Mirror Control Switch (Surface Adjust Left) Mirror adjust switch signal (Left) OFF or ON OFF: Mirror adjust switch not pressed left
ON: Mirror adjust switch pressed left- Outer Mirror Control Switch (Surface Adjust Up) Mirror adjust switch signal (Up) OFF or ON OFF: Mirror adjust switch not pressed up
ON: Mirror adjust switch pressed up- Outer Mirror Control Switch (Surface Adjust Down) Mirror adjust switch signal (Down) OFF or ON OFF: Mirror adjust switch not pressed down
ON: Mirror adjust switch pressed down- Body Electrical > Power Distribution Box > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Mirror Heater Input Signal Mirror heater drive signal (Input) OFF or ON OFF: Ignition switch ON, rear defogger switch off
ON: Ignition switch ON, rear defogger switch on- Mirror Heater Output Signal Mirror heater drive signal (Output) OFF or ON OFF: Ignition switch ON, rear defogger switch off
ON: Ignition switch ON, rear defogger switch on- Mirror Heater Output Current Mirror heater output current 0 to 255.0 A Mirror heater operating: 2.8 to 3.4 A - Mirror Heater Fuse Shut Off Status Mirror heater output current shut off status OFF or ON OFF: Normal state
ON: Current shut off state- Mirror Heater Fuse Shut Off Count Mirror heater output current shut off count 0 to 255 0 -
- According to the display on the GTS, read the Data List.
- ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.