DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Mirrors >> Mirror (Int) - Service Information >> Inner Mirror Monitor Camera >> Removal [11/2023 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during inner mirror camera assembly removal/installation are shown below.

NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED

Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function When Necessary Procedures are not Performed Link
Rear television camera assembly*
  • Parking assist monitor system initialization
  • Television camera assembly optical axis (Back camera position setting)
 Parking Assist Monitor System Refer to CALIBRATION [10/2022 - ]
  1. Rear television camera view adjustment
 Panoramic View Monitor System Refer to CALIBRATION [11/2023 - ]
Replacement or removal and installation of 2 or more parts: 
  • Front television camera assembly, radiator grille sub-assembly or front bumper assembly
  • Rear television camera assembly
  • Side television camera assembly LH or outer rear view mirror assembly LH
  • Side television camera assembly RH or outer rear view mirror assembly RH
  1. Television camera view adjustment

*: Even when not replacing the part, it is necessary to perform the specified necessary procedures after installation.

Diesel-Data.com