DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Mirrors >> Mirror (Ext) - Service Information >> Outer Rear View Mirror >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Seat Position Memory System) 
    1. Check the operation of the mirror surface.
      NOTE:

      If the mirror surface is fully turned to the right, left, upward or downward position, the motor slips and produces a clicking noise. This is not a malfunction.

      1. Disconnect the outer rear view mirror assembly RH connector.
      2. Apply auxiliary battery voltage and check the operation of the mirror surface.
        GTY889500Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without harness connected
        (Outer Rear View Mirror Assembly RH)

        OK

        Auxiliary Battery Connection Specified Condition
        Auxiliary battery positive (+) → Terminal 7 (MV)
        Auxiliary battery negative (-) → Terminal 13 (M+)        		 Turns upward
        Auxiliary battery positive (+) → Terminal 13 (M+)
        Auxiliary battery negative (-) → Terminal 7 (MV)        		 Turns downward
        Auxiliary battery positive (+) → Terminal 14 (MH)
        Auxiliary battery negative (-) → Terminal 13 (M+)        		 Turns left
        Auxiliary battery positive (+) → Terminal 13 (M+)
        Auxiliary battery negative (-) → Terminal 14 (MH)        		 Turns right

        If the result is not as specified, replace the outer rear view mirror assembly RH.

  2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Seat Position Memory System) 
    1. Check the operation of the mirror surface.
      NOTE:

      If the mirror surface is fully turned to the right, left, upward or downward position, the motor slips and produces a clicking noise. This is not a malfunction.

      1. Disconnect the outer rear view mirror assembly LH connector.
      2. Apply auxiliary battery voltage and check the operation of the mirror surface.
        GTY919159Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without harness connected
        (Outer Rear View Mirror Assembly LH)

        OK

        Auxiliary Battery Connection Specified Condition
        Auxiliary battery positive (+) → Terminal 7 (MV)
        Auxiliary battery negative (-) → Terminal 13 (M+)        		 Turns upward
        Auxiliary battery positive (+) → Terminal 13 (M+)
        Auxiliary battery negative (-) → Terminal 7 (MV)        		 Turns downward
        Auxiliary battery positive (+) → Terminal 14 (MH)
        Auxiliary battery negative (-) → Terminal 13 (M+)        		 Turns left
        Auxiliary battery positive (+) → Terminal 13 (M+)
        Auxiliary battery negative (-) → Terminal 14 (MH)        		 Turns right

        If the result is not as specified, replace the outer rear view mirror assembly LH.

  3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Seat Position Memory System) 
    1. Check the operation of the mirror surface.
      NOTE:

      If the mirror surface is fully turned to the right, left, upward or downward position, the motor slips and produces a clicking noise. This is not a malfunction.

      1. Disconnect the outer rear view mirror assembly RH connector.
      2. Apply auxiliary battery voltage and check the operation of the mirror surface.
        GTY883652Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without harness connected
        (Outer Rear View Mirror Assembly RH)

        OK

        Battery Connection Specified Condition
        Auxiliary battery positive (+) → Terminal 1 (MV)
        Auxiliary battery negative (-) → Terminal 10 (M+)        		 Turns upward
        Auxiliary battery positive (+) → Terminal 10 (M+)
        Auxiliary battery negative (-) → Terminal 1 (MV)        		 Turns downward
        Auxiliary battery positive (+) → Terminal 9 (MH)
        Auxiliary battery negative (-) → Terminal 10 (M+)        		 Turns left
        Auxiliary battery positive (+) → Terminal 10 (M+)
        Auxiliary battery negative (-) → Terminal 9 (MH)        		 Turns right

        If the result is not as specified, replace the outer rear view mirror assembly RH.

  4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Seat Position Memory System) 
    1. Check the operation of the mirror surface.
      NOTE:

      If the mirror surface is fully turned to the right, left, upward or downward position, the motor slips and produces a clicking noise. This is not a malfunction.

      1. Disconnect the outer rear view mirror assembly LH connector.
      2. Apply auxiliary battery voltage and check the operation of the mirror surface.
        GTY915340Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without harness connected
        (Outer Rear View Mirror Assembly LH)

        OK

        Battery Connection Specified Condition
        Auxiliary battery positive (+) → Terminal 1 (MV)
        Auxiliary battery negative (-) → Terminal 10 (M+)        		 Turns upward
        Auxiliary battery positive (+) → Terminal 10 (M+)
        Auxiliary battery negative (-) → Terminal 1 (MV)        		 Turns downward
        Auxiliary battery positive (+) → Terminal 9 (MH)
        Auxiliary battery negative (-) → Terminal 10 (M+)        		 Turns left
        Auxiliary battery positive (+) → Terminal 10 (M+)
        Auxiliary battery negative (-) → Terminal 9 (MH)        		 Turns right

        If the result is not as specified, replace the outer rear view mirror assembly LH.

Diesel-Data.com