Speedometer Malfunction [12/2019 - ]: Procedure

CHECK CAN COMMUNICATION SYSTEM

Check if CAN communication DTCs are output.

for HV Model: Refer to DIAGNOSIS SYSTEM [12/2019 - 09/2020] , or refer to DIAGNOSIS SYSTEM [09/2020 - 10/2021] , or refer to DIAGNOSIS SYSTEM [10/2021 - 10/2022] , or refer to DIAGNOSIS SYSTEM [10/2022 - 11/2023] , or refer to DIAGNOSIS SYSTEM [11/2023 - ]

for Gasoline Model: Refer to DIAGNOSIS SYSTEM [12/2019 - 09/2020] , or refer to DIAGNOSIS SYSTEM [09/2020 - 10/2022] , or refer to DIAGNOSIS SYSTEM [10/2022 - 11/2023] , or refer to DIAGNOSIS SYSTEM [11/2023 - ]

Result

Result	Proceed to
DTCs are not output	A
DTCs are output	B

Result:

B

GO TO CAN COMMUNICATION SYSTEM

for HV Model: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - 10/2021] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2021 - 10/2022] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - 11/2023] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2023 - ]

for Gasoline Model: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - 10/2022] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - 11/2023] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2023 - ]

Result:

A

See step 2

CHECK FOR DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)

Check if electronically controlled brake system DTCs are output.

for HV Model
Chassis > Brake/EPB > Trouble Codes

Chassis > Brake Booster > Trouble Codes
for Gasoline Model
Chassis > Brake/EPB > Trouble Codes

Result

Result	Proceed to
DTCs are not output	A
DTCs are output	B

Result:

B

GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM

for HV Model: Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2019 - 10/2021] , or refer to DIAGNOSTIC TROUBLE CODE CHART [10/2021 - 11/2023] , or refer to DIAGNOSTIC TROUBLE CODE CHART [11/2023 - ]

for Gasoline Model: Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2019 - 10/2022] , or refer to DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 11/2023] , or refer to DIAGNOSTIC TROUBLE CODE CHART [11/2023 - ]

Result:

A

See step 3

PERFORM ACTIVE TEST USING GTS

Perform the Active Test according to the display on the GTS.

Body Electrical > Combination Meter > Active Test

Tester Display	Measurement Item	Control Range	Diagnostic Note
Speedometer Operation (0km/h, 0MPH)	Speedometer (0 km/h, 0 mph)	ON	When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer.
Speedometer Operation (40km/h, 40MPH)	Speedometer (40 km/h, 40 mph)	ON	When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer. The value displayed on the speedometer may deviate.*
Speedometer Operation (80km/h, 80MPH)	Speedometer (80 km/h, 80 mph)	ON	When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer. The value displayed on the speedometer may deviate.*
Speedometer Operation (120km/h, 120MPH)	Speedometer (120 km/h, 120 mph)	ON	When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer. The value displayed on the speedometer may deviate.*
Speedometer Operation (160km/h, 160MPH)	Speedometer (160 km/h, 160 mph)	ON	When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer. The value displayed on the speedometer may deviate.*
Speedometer Operation (200km/h, 200MPH)	Speedometer (200 km/h, 200 mph)	ON	When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer. The value displayed on the speedometer may deviate.*
Speedometer Operation (240km/h, 240MPH)	Speedometer (240 km/h, 240 mph)	ON	When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer.

*: For the tolerance of each Speed Signal Input Active Test, refer to On-vehicle Inspection.
Refer to ON-VEHICLE INSPECTION [12/2019 - ]

Body Electrical > Combination Meter > Active Test

Tester Display
Speedometer Operation (0km/h, 0MPH)

Body Electrical > Combination Meter > Active Test

Tester Display
Speedometer Operation (40km/h, 40MPH)

Body Electrical > Combination Meter > Active Test

Tester Display
Speedometer Operation (80km/h, 80MPH)

Body Electrical > Combination Meter > Active Test

Tester Display
Speedometer Operation (120km/h, 120MPH)

Body Electrical > Combination Meter > Active Test

Tester Display
Speedometer Operation (160km/h, 160MPH)

Body Electrical > Combination Meter > Active Test

Tester Display
Speedometer Operation (200km/h, 200MPH)

Body Electrical > Combination Meter > Active Test

Tester Display
Speedometer Operation (240km/h, 240MPH)

OK

Speedometer indication is normal.

HINT:

When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.

Result

Result	Proceed to
OK (for HV Model)	A
OK (for Gasoline Model)	B
NG	C

Result:

A

REPLACE NO. 2 SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY). Refer to REMOVAL [12/2019 - 10/2022] , or refer to REMOVAL [10/2022 - 11/2023] , or refer to REMOVAL [11/2023 - ]

Result:

B

REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY). Refer to REMOVAL [12/2019 - 10/2022] , or refer to REMOVAL [10/2022 - 11/2023] , or refer to REMOVAL [11/2023 - ]

Result:

C

REPLACE COMBINATION METER ASSEMBLY. Refer to REMOVAL [12/2019 - ]