DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information >> HEADUP Display >> Reassembly [12/2019 - ] >> Procedure

Reassembly [12/2019 - ]: Procedure

  1. INSTALL NO. 1 COMBINATION METER MIRROR PLATE 
    1. Install the No. 1 combination meter mirror plate with the 7 screws.
      GTY945054Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 1 COMBINATION SPEEDOMETER CUSHION 
    1. Clean the meter mirror sub-assembly surface.
      1. Remove any remaining double-sided tape from the meter mirror sub-assembly.
      2. Wipe off any tape adhesive residue with cleaner.
    2. Remove the release paper from a new No. 1 combination speedmeter cushion.

      HINT: 

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the No. 1 combination speedometer cushion as shown in the illustration.
      GTY859516Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Edge of Curved Surface *b Rib of Meter Mirror Sub-assembly
      Double-sided Tape - -
      STANDARD MEASUREMENT

      Area Measurement Area Measurement
      A -5.0 to 5.0 mm (-0.197 to 0.197 in.) B 0 to 5.0 mm (0 to 0.197 in.)
Diesel-Data.com