Door Mirror Foot Light Circuit [11/2023 - ]: Procedure
- PERFORM ACTIVE TEST USING GTS
- Perform the Active Test according to the display on the GTS.
Body Electrical > Mirror L > Active Test
Tester Display Measurement Item Control Range Diagnostic Note Foot Illumination Door mirror foot light LH OFF or ON Operate with ignition switch ON and the vehicle stopped. Body Electrical > Mirror R > Active Test
Tester Display Measurement Item Control Range Diagnostic Note Foot Illumination Door mirror foot light RH OFF or ON Operate with ignition switch ON and the vehicle stopped. Body Electrical > Mirror L > Active Test
Tester Display Foot Illumination Body Electrical > Mirror R > Active Test
Tester Display Foot Illumination OK
Door mirror foot lights illuminate.
Result
Result Proceed to OK A NG (Door mirror foot light LH does not illuminate) B NG (Door mirror foot light RH does not illuminate) C
Result:
A
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to PROBLEM SYMPTOMS TABLE [11/2023 - ]
Result:
C
See step 4
Result:
B
See step 2
- Perform the Active Test according to the display on the GTS.
- INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH
- Remove the outer rear view mirror assembly LH.
*a Component without harness connected
(Outer Rear View Mirror Assembly LH)Refer to REMOVAL [11/2023 - ]
- Connect a positive (+) lead from the auxiliary battery to terminal 2 (MLP+).
- Connect a negative (-) lead from the auxiliary battery to terminal 12 (-).
- Check that the door mirror foot light LH illuminates.
OK
Door mirror foot light illuminates.
Result
Proceed to OK NG
Result:
OK
REPLACE OUTER MIRROR CONTROL ECU ASSEMBLY LH. Refer to REMOVAL [12/2019 - ]
Result:
NG
See step 3
- Remove the outer rear view mirror assembly LH.
- INSPECT OUTER MIRROR LIGHT ASSEMBLY LH
Refer to INSPECTION [12/2019 - ]
Result
Proceed to OK NG Result:
OK
REPLACE OUTER REAR VIEW MIRROR ASSEMBLY LH. Refer to REMOVAL [11/2023 - ]
Result:
NG
REPLACE OUTER MIRROR LIGHT ASSEMBLY LH. Refer to REMOVAL [11/2023 - ]
- INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH
- Remove the outer rear view mirror assembly RH.
*a Component without harness connected
(Outer Rear View Mirror Assembly RH)Refer to REMOVAL [11/2023 - ]
- Connect a positive (+) lead from the auxiliary battery to terminal 2 (MLP+).
- Connect a negative (-) lead from the auxiliary battery to terminal 12 (-).
- Check that the door mirror foot light RH illuminates.
OK
Door mirror foot light illuminates.
Result
Proceed to OK NG
Result:
OK
REPLACE OUTER MIRROR CONTROL ECU ASSEMBLY RH. Refer to REMOVAL [12/2019 - ]
Result:
NG
See step 5
- Remove the outer rear view mirror assembly RH.
- INSPECT OUTER MIRROR LIGHT ASSEMBLY RH
Refer to INSPECTION [12/2019 - ]
Result
Proceed to OK NG Result:
OK
REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH. Refer to REMOVAL [11/2023 - ]
Result:
NG
REPLACE OUTER MIRROR LIGHT ASSEMBLY RH. Refer to REMOVAL [11/2023 - ]
