DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (W/O AFS) - Diagnostics - Introduction >> LIGHTING SYSTEM (w/o AFS) >> Terminals Of Ecu [12/2019 - 10/2022] >> Terminals Of Ecu [12/2019 - 10/2022]

Terminals Of Ecu [12/2019 - 10/2022]

  1. CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY 
    GTY848254Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.
    2. Measure the voltage and resistance according to the value(s) in the table below.
      Terminal No. (Symbol) Terminal Description Condition Specified Condition
      4B-3 - Body ground Ground Always Below 1 Ω
      4C-1 - Body ground Auxiliary battery power supply Ignition switch off*1
      Always*2
      11 to 14 V
      4F-1 - Body ground Auxiliary battery power supply Ignition switch off*1
      Always*2
      11 to 14 V
      H42-19 (GND2) - Body ground Ground Always Below 1 Ω
      1. *1: for HV Model
      2. *2: for Gasoline Model
    3. Connect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.
    4. Measure the voltage and check for pulses according to the value(s) in the table below.
      Terminal No. (Symbol) Terminal Description Condition Specified Condition
      4A-40 - Body ground*1 ACC power supply Ignition switch off Below 1 V
      Ignition switch ACC 11 to 14 V
      4B-11 - Body ground Taillight and rear side marker light drive output Taillights on 11 to 14 V
      Taillights off Below 1 V
      4C-19 - Body ground R shift position switch signal Ignition switch off, reverse (R) not selected Below 1 V
      Ignition switch ON, reverse (R) selected 11 to 14 V
      4C-23 - Body ground*1 IG power supply Ignition switch off Below 1 V
      Ignition switch ON 11 to 14 V
      4C-25 - Body ground*2 FOG FR relay drive output Taillights on, fog light switch in front position Below 1 V
      Taillights on, fog light switch in off position 11 to 14 V
      4C-28 - Body ground Daytime running light system drive output Daytime running light system operating Below 1 V
      Daytime running light system not operating 11 to 14 V
      4C-31 - Body ground H-LP LH relay drive output Light control switch in head position Below 1 V
      Taillight off 11 to 14 V
      4C-32 - Body ground Parking lights and front side marker lights drive output Taillights on 11 to 14 V
      Taillights off Below 1 V
      4D-10 - Body ground Back-up lights drive output Ignition switch off, reverse (R) not selected Below 1 V
      Ignition switch ON, reverse (R) selected 11 to 14 V
      4D-30 - Body ground Taillight, rear side marker light and license plate lights drive output Taillights on 11 to 14 V
      Taillights off Below 1 V
      H43-12 (HRY2) - Body ground H-LP RH relay drive output Light control switch in head position Below 1 V
      Taillights off 11 to 14 V
      H43-13 (DIM) - Body ground High beam headlight drive output Light control switch in head position and dimmer switch in high or high flash position Below 1 V
      Dimmer switch not in high or high flash position 11 to 14 V
      H43-16 (HEAD) - Body ground Light control switch head position input Light control switch in head position Below 1 V
      Light control switch not in head position 11 to 14 V
      H43-23 (CLTB) - H43-25 (CLTE) Automatic light control sensor power supply output Ignition switch ON 11 to 14 V
      H43-24 (CLTS) - Body ground Automatic light control sensor signal input Ignition switch off Below 1 V
      Ignition switch ON Pulse generation
      (See waveform 1)
      H43-26 (AHBI) - Body ground Auto high beam switch signal input Auto high beam switch on Below 1 V
      Auto high beam switch off 11 to 14 V
      H44-21 (AHID) - Body ground Auto high beam switch indicator drive output Ignition switch ON, auto high beam switch on Below 1 V
      Ignition switch ON, auto high beam switch off 11 to 14 V
      1. *1: for Gasoline Model
      2. *2: w/ Front Fog Light
      1. Waveform 1
        GTY442965Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        Item Content
        Tester Connection H43-24 (CLTS) - Body ground
        Tool setting 2 V/DIV., 10 ms./DIV.
        Condition Ignition switch ON

        HINT: 

        The communication waveform changes according to the surrounding brightness.

  2. CHECK COMBINATION METER ASSEMBLY 

    Refer to TERMINALS OF ECU [12/2019 - 11/2023]

  3. CHECK FORWARD RECOGNITION CAMERA 

    Refer to TERMINALS OF ECU [12/2019 - ]

  4. CHECK STEERING SENSOR 

    for HV Model: Refer to TERMINALS OF ECU [12/2019 - 10/2021] , or refer to TERMINALS OF ECU [10/2021 - 10/2022]

    for Gasoline Model: Refer to TERMINALS OF ECU [12/2019 - 10/2022]