Caution / Notice / Hint
NOTE:
- If the headlight ECU sub-assembly LH or headlight assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.
Refer to INITIALIZATION [12/2019 - 11/2023]
- If any of the following are performed, it is necessary to initialize the headlight ECU sub-assembly LH.
Refer to INITIALIZATION [12/2019 - 11/2023]
- Replacement of the rear height control sensor sub-assembly LH
- Removal/installation of the rear height control sensor sub-assembly LH
- Work that changes the vehicle height such as replacement of suspension components
- When replacing the headlight ECU sub-assembly LH or headlight assembly LH, always replace it with a new one. If a headlight ECU sub-assembly LH which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.