DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Ext) - Service Information >> Hazard Warning Switch >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 22 [10/2022 - 11/2023] , or refer to PROCEDURE - Step 22 [11/2023 - ]

  2. REMOVE RADIO AND DISPLAY ASSEMBLY WITH AIR CONDITIONING CONTROL (for 8 Inch Display) 

    Refer to PROCEDURE - Step 3 [10/2022 - 11/2023] , or refer to PROCEDURE - Step 3 [11/2023 - ]

  3. REMOVE RADIO AND DISPLAY ASSEMBLY WITH AIR CONDITIONING CONTROL (for 12.3 Inch Display) 

    Refer to PROCEDURE - Step 9 [10/2022 - 11/2023] , or refer to PROCEDURE - Step 9 [11/2023 - ]

  4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 25 [10/2022 - 11/2023] , or refer to PROCEDURE - Step 25 [11/2023 - ]

  5. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY 
    1. Disengage the 5 clips to remove the No. 3 instrument panel register assembly as shown in the illustration.
      GTY933383Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  6. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY 
    1. Disconnect the connector.
      GTY923412Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 claws and remove the hazard warning signal switch assembly as shown in the illustration.
      GTY883185Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
Diesel-Data.com