Caution / Notice / Hint
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear height control sensor sub-assembly LH removal/installation are shown below.
NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR HV MODEL)
| Replaced Part or Performed Procedures | Necessary Procedures | Effect/Inoperative Function When Necessary Procedures are not Performed | Link |
|---|---|---|---|
| Rear height control sensor sub-assembly LH* | Perform headlight ECU sub-assembly LH initialization | Lighting System (EXT) (w/ AFS) | Refer to INITIALIZATION [12/2019 - 11/2023] |
*: Even when not replacing the part, it is necessary to perform the specified necessary procedures after installation.
NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR GASOLINE MODEL)
| Replaced Part or Performed Procedures | Necessary Procedures | Effect/Inoperative Function When Necessary Procedures are not Performed | Link |
|---|---|---|---|
| Rear height control sensor sub-assembly LH* | Perform headlight ECU sub-assembly LH initialization | Lighting System (EXT) (w/ AFS) | Refer to INITIALIZATION [12/2019 - 11/2023] |
*: Even when not replacing the part, it is necessary to perform the specified necessary procedures after installation.