DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Safety Connect System - Diagnostics - Introduction >> Safety Connect System >> ACN Call End [12/2019 - ] >> ACN Call End [12/2019 - ]

ACN Call End [12/2019 - ]

  1. ACN CALL END 

    This function terminates the ACN (Automatic Collision Notification) to the telematics provider. After a collision in which the DCM receives "Collision Detection Signal", the vehicle will send the emergency call notification to the telematics provider until the emergency call cancellation utility has been run, or the BUB (Back-Up Battery) (if equipped) is depleted. Use the emergency call cancellation utility to stop the ACN call.

    NOTE:

    The BUB (Back-Up Battery) must not be replaced while an ACN call is in progress.

    1. Connect the GTS to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the GTS on.
    4. Choose "Telematics" from the System Selection Menu, and then click "Utility".
    5. Click "Emergency Call Cancellation " on the Utility Selection Menu.

      Body Electrical > Telematics > Utility 

      Tester Display
      Emergency Call Cancellation
    6. Follow the instructions on the GTS.
Diesel-Data.com