DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Safety Connect System - Diagnostic Codes, Symptom Tests & Circuit Tests >> Safety Connect System >> Green Indicator Remains Off [12/2019 - ] >> Procedure

Green Indicator Remains Off [12/2019 - ]: Procedure

  1. CONFIRM GREEN INDICATOR COMES ON 
    1. After the ignition switch is turned to ON and the manual (SOS) switch red indicator has come on for 2 seconds, confirm that the manual (SOS) switch green indicator comes on for 2 seconds.

      OK

      Green indicator comes on.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    See step  6

    Result: 

    OK 

    See step  2

  2. CONFIRM SUBSCRIPTION MODE 
    1. Confirm the indicator status 5 seconds after the ignition switch is turned to ON.

      Result

      Result Proceed to
      Green indicator remains on A
      Green indicator remains off B

    Result: 

    USE SIMULATION METHOD TO CHECK 

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - ]

    Result: 

    See step  3

  3. INPUT VIN WITH GTS 
    1. Turn the ignition switch off.
    2. Connect the GTS to the DLC3.
    3. Turn the ignition switch to ON and wait for 10 seconds.
    4. Turn the GTS on.
    5. Choose "Telematics" from the System Selection Menu, and then click "Utility".
    6. Click "VIN Synchronization" on the Utility Selection Menu.

      Refer to DCM ACTIVATION [12/2019 - ]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  4

  4. CONFIRM SUBSCRIPTION MODE 
    1. Confirm the indicator status at 5 seconds after the ignition switch is turned to ON.

      Result

      Result Proceed to
      Green indicator remains on A
      Green indicator remains off B

    Result: 

    END 

    Result: 

    See step  5

  5. REPLACE DCM (TELEMATICS TRANSCEIVER) 
    1. Replace the DCM (telematics transceiver).

      Refer to REMOVAL [12/2019 - 10/2022] , or refer to REMOVAL [10/2022 - 11/2023] , or refer to REMOVAL [11/2023 - ]

      NOTE:
      • The ignition switch must be off.
      • Do not exchange the DCM (telematics transceiver) with one from another vehicle.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    PERFORM DCM ACTIVATION 

    Refer to DCM ACTIVATION [12/2019 - ]

  6. CHECK DTC 
    1. Turn the ignition switch off.
    2. Connect the GTS to the DLC3.
    3. Turn the ignition switch to ON and wait for 10 seconds or more.
    4. Turn the GTS on.
    5. Clear the DTCs.

      Body Electrical > Telematics > Clear DTCs 

    6. Check for DTCs and check that no DTCs are output.

      Body Electrical > Telematics > Trouble Codes 

      OK

      No DTCs are output.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    GO TO DIAGNOSTIC TROUBLE CODE CHART 

    Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2019 - 10/2022] , or refer to DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 11/2024] , or refer to DIAGNOSTIC TROUBLE CODE CHART [11/2024 - ]

    Result: 

    OK 

    See step  7

  7. REPLACE DCM (TELEMATICS TRANSCEIVER) 
    1. Replace the DCM (telematics transceiver).

      Refer to REMOVAL [12/2019 - 10/2022] , or refer to REMOVAL [10/2022 - 11/2023] , or refer to REMOVAL [11/2023 - ]

      NOTE:
      • The ignition switch must be off.
      • Do not exchange the DCM (telematics transceiver) with one from another vehicle.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    PERFORM DCM ACTIVATION 

    Refer to DCM ACTIVATION [12/2019 - ]