DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Rear Seat Entertainment System - Diagnostics - Introduction >> Rear Seat Entertainment System >> Operation Check [12/2019 - 10/2022] >> Operation Check [12/2019 - 10/2022]

Operation Check [12/2019 - 10/2022]

  1. START DIAGNOSTIC MODE 
    1. Enter diagnostic mode.

      w/o Navigation System: Refer to DTC CHECK / CLEAR [12/2019 - 10/2022]

      w/ Navigation System for 8 Inch Display: Refer to DTC CHECK / CLEAR [12/2019 - 10/2022]

      w/ Navigation System for 12.3 Inch Display: Refer to DTC CHECK / CLEAR [12/2019 - 10/2022]

    2. Diagnostic mode starts and the "REAR Check" screen will be displayed.
  2. COLOR BAR CHECK 

    HINT: 

    • Use the rear switch and volume assembly for each inspection.
    • This mode checks the color display on the television display assembly.
    • The television display assembly is not a touch panel type display. Do not touch the screen.
    • Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.
    • The television display assembly is not a touch panel type. Do not touch the screen.
    1. Select "Color Bar Check".
      GTY864869Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Color Bar Check
      GTY372221Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Check the display color.

        HINT: 

        • The entire screen turns to the color or stripe selected.
        • The screen returns to the "Color Bar Check" screen if the rear switch and volume assembly is operated again.
  3. REMOTE CONTROL CHECK 

    HINT: 

    • Use the rear switch and volume assembly for each inspection.
    • The rear switch and volume assembly switches are checked in the following procedure.
    • The television display assembly is not a touch panel type display. Do not touch the screen.
    • Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.
    1. Select "Remote Control Check".
      GTY864870Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remote Control Check
      GTY874166Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Operate each switch and check that the switch name is correctly displayed.
        SCREEN DESCRIPTION

        Display Content
        *a: Name of switch being pushed Name of the pushed switch is displayed
  4. START SCREEN LANGUAGE 

    HINT: 

    • Use the rear switch and volume assembly for each inspection.
    • The language for the start screen is selected in this procedure.
    • The television display assembly is not a touch panel type display. Do not touch the screen.
    • Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.
    1. Select "Start Screen Language".
      GTY864871Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Select the language for the start screen.
      GTY430863Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. FINISH DIAGNOSTIC MODE 
    1. Turn the ignition switch off.
Diesel-Data.com