DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio / Video System - Service Information >> Radio Receiver >> Installation [10/2022 - ] >> Procedure

Installation [10/2022 - ]: Procedure

  1. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for 8 Inch Display) 
  2. INSTALL NO. 2 RADIO RECEIVER BRACKET (for 8 Inch Display) 
    1. Install the No. 2 radio receiver bracket with the 2 screws.
  3. INSTALL NO. 1 RADIO RECEIVER BRACKET (for 8 Inch Display) 
    1. Install the No. 1 radio receiver bracket with the 2 screws.
  4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 8 Inch Display) 
    1. Engage the 3 claws to temporarily install the radio and display receiver assembly with bracket.
    2. Install the radio and display receiver assembly with bracket with the 4 screws.
  5. INSTALL RADIO AND DISPLAY ASSEMBLY WITH AIR CONDITIONING CONTROL (for 8 Inch Display) 
    1. Engage the 2 clamps.
    2. Connect each connector.
    3. Engage the 5 clips to temporarily install the radio and display assembly with air conditioning control as shown in the illustration.
      GTY1121972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    4. Install the radio and display assembly with air conditioning control with the 4 bolts.
  6. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 8 Inch Display) 

    Refer to PROCEDURE - Step 23

  7. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for 12.3 Inch Display) 
  8. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for 12.3 Inch Display) 

    Refer to PROCEDURE - Step 1

  9. INSTALL NO. 2 RADIO BRACKET (for 12.3 Inch Display) 
    1. Install the No. 2 radio bracket with the 2 screws.
  10. INSTALL NO. 1 RADIO BRACKET (for 12.3 Inch Display) 
    1. Install the No. 1 radio bracket with the 2 screws.
  11. INSTALL RADIO AND DISPLAY ASSEMBLY WITH AIR CONDITIONING CONTROL (for 12.3 Inch Display) 
    1. Engage the 2 clamps.
    2. Connect each connector.
    3. Engage the 5 clips to temporarily install the radio and display assembly with bracket as shown in the illustration.
      GTY1120295Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    4. Install the radio and display assembly with bracket with the 4 bolts.
  12. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 12.3 Inch Display) 

    Refer to PROCEDURE - Step 23

  13. PERFORM REGISTRATION 

    HINT: 

    When replacing the radio and display receiver assembly, perform registration.

    Refer to REGISTRATION [10/2022 - ] 

Diesel-Data.com