Data List / Active Test [12/2019 - 10/2022]
- DATA LIST NOTE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- Connect the GTS to the DLC3.
- Turn the ignition switch to ON.
- Turn the GTS on.
- Enter the following menus: Body Electrical / Navigation System / Data List.
- Read the Data List according to the display on the GTS.
Body Electrical > Navigation System > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Battery Voltage Auxiliary battery voltage Min.: 0 V, Max.: 24 V 11 to 14 V*1
10.5 to 16 V*2- Active Dimmer Active dimmer function ON or OFF ON: Active dimmer function on
OFF: Active dimmer function off- Tail Light SW Taillight switch ON or OFF ON: Light control switch in tail or head position
OFF: Light control switch off or AUTO- Reverse Signal Reverse signal ON or OFF ON: Shift lever in R
OFF: Shift lever not in R- Parking Brake Parking brake switch ON or OFF ON: Parking brake applied
OFF: Parking brake released- Ignition Ignition switch ON or OFF ON: Ignition switch ON
OFF: Ignition switch off or ACC"Off" is displayed even though the ignition switch is ACC Vehicle Speed Maximum wheel speed sensor reading Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) Vehicle stopped: 0 km/h (0 mph) When driving at constant speed: No large fluctuations HDMI Line (Blu-ray Disc Player) - Disconnected or Connected Disconnected Not available - *1: w/o Stop and Start System
- *2: w/ Stop and Start System