Data List / Active Test [11/2023 - ]
- DATA LIST NOTE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- Read the Data List according to the display on the GTS.
Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Manual Door Lock Switch (D/P Door) Door control switch assembly lock signal OFF or ON OFF: Lock switch of door control switch assembly not pushed
ON: Lock switch of door control switch assembly pushed- Door Lock Switch Status by a Mechanical Key (D/P Door) Driver door key-linked lock / unlock switch lock signal OFF or ON OFF: Driver door key cylinder not turned to lock position
ON: Driver door key cylinder turned to lock position- Manual Door Unlock Switch (D/P Door) Door control switch assembly unlock signal OFF or ON OFF: Unlock switch of door control switch assembly not pushed
ON: Unlock switch of door control switch assembly pushed- Door Unlock Switch Status by a Mechanical Key (D Door) Driver door key-linked lock / unlock switch lock signal OFF or ON OFF: Driver door key cylinder not turned to unlock position
ON: Driver door key cylinder turned to unlock position- FR Door Lock Position Switch Status Front door RH unlock detection switch signal Lock or Unlock Lock: Front door RH locked
Unlock: Front door RH Unlocked- FL Door Lock Position Switch Status Front door LH unlock detection switch signal Lock or Unlock Lock: Front door LH locked
Unlock: Front door LH Unlocked- RR Door Lock Position Switch Status Rear door RH unlock detection switch signal Lock or Unlock Lock: Rear door RH locked
Unlock: Rear door RH Unlocked- RL Door Lock Position Switch Status Rear door LH unlock detection switch signal Lock or Unlock Lock: Rear door LH locked
Unlock: Rear door LH Unlocked- Back Door Lock Position Status Back door lock signal Lock or Unlock Lock: Back door locked
Unlock: Back door unlocked- FR Door Courtesy Switch Status Front door courtesy light switch (RH) signal Close or Open Close: Front door RH closed
Open: Front door RH open- FL Door Courtesy Switch Status Front door courtesy light switch (LH) signal Close or Open Close: Front door LH closed
Open: Front door LH open- RR Door Courtesy Switch Status Rear door courtesy light switch (RH) signal Close or Open Close: Rear door RH closed
Open: Rear door RH open- RL Door Courtesy Switch Status Rear door courtesy light switch (LH) signal Close or Open Close: Rear door LH closed
Open: Rear door LH open- Back Door Courtesy Switch Status Back door courtesy light switch signal Close or Open Close: Back door closed
Open: Back door open- IGR Power Ignition switch ON signal OFF or ON OFF: Ignition switch off or ACC
ON: Ignition switch ON- Unlock Key Twice Function Key-linked 2-step unlock function OFF or ON Customize setting displayed - Automatic Door Lock Setting Automatic door lock function OFF, Link Shift or Link Speed Customize setting displayed - Automatic Door Unlock Setting Automatic door unlock function OFF, Link D-Door or Link Shift Customize setting displayed - Body Electrical > Master Switch > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Door Lock Switch Status Multiplex network master switch assembly lock signal OFF or ON OFF: Lock side of multiplex network master switch assembly not pushed
ON: Lock side of multiplex network master switch assembly pushed- Door Unlock Switch Status Multiplex network master switch assembly unlock signal OFF or ON OFF: Unlock side of multiplex network master switch assembly not pushed
ON: Unlock side of multiplex network master switch assembly pushed-
- Read the Data List according to the display on the GTS.
- ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.