Front/Rear Door Outer Panel Installation Substitution - Crib # 199 (S-CRIB-199)

WARNING: This page is about the Highlander Hybrid LE, 2.5L Eng VIN A, which is a different variant/trim than selected.

Publication date: 2021-12-01
Reference number: S-CRIB-199

FRONT/REAR DOOR OUTER PANEL INSTALLATION SUBSTITUTION - CRIB # 199

COLLISION REPAIR INFORMATION

Reference Number(s): S-CRIB-199, Date of Issue: December 01, 2021

SCION:	All Toyota, Lexus and Scion Vehicles
SECTION:	Vehicle Exterior

BACKGROUND

Toyota, Lexus, and Scion vehicles have mainly three different methods for front/rear door outer panel hemming installation depending on model and model year.

[Method 1] Body Sealer + Spot MIG Weld (Fig. 1)

[Method 2] Adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115) + Spot MIG Weld (Fig. 2)

[Method 3] Adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115) (Fig. 3)

Repair:

Models and model years with installation method #1 and #2 can be substituted to installation method #3.

Hemming thickness must be within 0.2mm of the original door hemming thickness.

NOTE: This applies only to hemming area. Other areas of repair procedures have to be followed per Collision Repair Manual. (e.g. body sealer to door reinforcement, plug weld)