DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Power Back Door System - Diagnostic Codes & Symptom Tests >> Power Back Door System >> Power Back Door cannot be Operated Using Kick Sensor [11/2023 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • If the multiplex network door ECU has been replaced, or if any of the connectors has been disconnected, initialize the power back door system.

    Refer to INITIALIZATION [11/2023 - ]

  • First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before troubleshooting this problem.

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2023 - ]

  • Check the smart key system (for Entry Function) first before troubleshooting the power back door system.

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2023 - ]

  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.
Diesel-Data.com