DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Power Back Door System - Diagnostics - Introduction >> Power Back Door System >> Customize Parameters [11/2023 - ] >> Customize Parameters [11/2023 - ]

Customize Parameters [11/2023 - ]

  1. CUSTOMIZE POWER BACK DOOR SYSTEM 
    1. Customizing with the GTS.
      1. Select the setting by referring to the table below.

        PSD & PBD operation 

        Tester Display Description Default Setting ECU
        Kick Sensor Operation Function with ACC ON Status of the hands free power back door function with ignition switch ACC.*2 Disable $00:Enable, $01:Disable Main body ECU (multiplex network body ECU)
        PBD SW Operating Condition Setting No. 1 power back door control switch or power back door control switch operation. Long Press (0.8s) $00:Short Press (0.04s), $01:Long Press (0.8s) Multiplex network door ECU
        PBD Buzzer Function Function that changes the power back door warning buzzer setting. OFF $00:OFF, $01:ON Multiplex network door ECU
        PBD Assist Close Function Function that enables/disables the power back door assist close operation. When set to ON, the back door will close automatically when operated in the close direction manually. ON $00:OFF, $01:ON Multiplex network door ECU
        PBD Assist Open Function Function that enables/disables the power back door assist open operation. When set to ON, the back door will open automatically when the back door opener switch assembly (open switch) is operated. ON $00:OFF, $01:ON Multiplex network door ECU
        PBD Door Unlock with One Motion Setting Function that selects the door or doors to unlock when the back door is locked and the electrical key transmitter sub-assembly (electrical key) is pushed to operate the power back door.*3 ALL DOORS $00:Back Door, $01:All Doors Multiplex network door ECU
        PBD Wireless Function Function that operates the power back door by pushing the transmitter switch (electrical key transmitter sub-assembly). ON $00:OFF, $01:ON Multiplex network door ECU
        PBD Wireless One Motion Function Wireless one motion function.*1 ON $00:OFF, $01:ON Multiplex network door ECU
        PBD Wireless SW Setting Wireless operation setting condition. Long Press (0.8s) $00:1 Time Press, $01:2 Times Press, $02:Long Press (0.8s) Multiplex network door ECU
        PBD Kick-in Beep Sound Function that sounds a buzzer when a kick operation detected. ON $00:OFF, $01:ON Multiplex network door ECU
        1. *1: Enables when the following conditions are met:
          • "Wireless Backdoor Open Operation Adjust" is set to other than "Prohibit"
          • "PBD Wireless Function" is set to "ON"
        2. *2: w/ Hands Free Power Back Door
        3. *3: Enables when the following conditions are met:
          • "PBD Wireless One Motion Function" is set to "ON"
    2. Customizing with the multi-information display (combination meter assembly)
      1. Turn the ignition switch to ON.
      2. Enter the following menus: Vehicle Settings / PBD.
      3. Select the setting by referring to the table below.
        Display Description Default Setting Relevant ECU
        System Settings Function that enables/disables the power back door. ON OFF / ON Multiplex network door ECU
        Hands Free* Function that enables/disables the hands free power back door ON OFF / ON Multiplex network door ECU
        Opening Adjustment Function that changes the position that the power back door stops during an open operation. 5 5, 4, 3, 2 or 1 Multiplex network door ECU
        Volume Function that changes the volume setting of the power back door buzzer. 3 1/2/3 Multiplex network door ECU
        1. *: w/ Hands Free Power Back Door
Diesel-Data.com