DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Power Door Lock Control System - Diagnostics - Introduction >> Power Door Lock Control System >> Customize Parameters [12/2019 - 10/2022] >> Customize Parameters [12/2019 - 10/2022]

Customize Parameters [12/2019 - 10/2022]

  1. CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.

    HINT: 

    The following items can be customized.

    1. Customizing with the GTS
      1. Connect the GTS to the DLC3.
      2. Turn the ignition switch to ON.
      3. Turn the GTS on.
      4. Enter the following menus: Customize Setting / Door Lock.
      5. Select the setting by referring to the table below.

        Door Lock 

        Tester Display Description Default Setting ECU
        Unlock Key Twice Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        Automatic Door Lock Function
        • Link Shift: Function that locks all doors when the shift lever is moved out of P, with the ignition switch ON and all doors closed
        • Link Speed: Function that locks all of the doors when the vehicle speed reaches a certain level
        Link Shift 00:OFF, 01:Link Shift, 10:Link Speed Main body ECU (Multiplex network body ECU)
        Automatic Door Unlock Function
        • Link D-door: Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the ignition switch being turned off
        • Link Shift: Function that unlocks all doors when the shift lever is moved to P from any position other than P with the ignition switch ON
        Link Shift 00:OFF, 01:Link D-door, 10:Link Shift Main body ECU (Multiplex network body ECU)
    2. Customizing with the multi-display
      1. Turn the ignition switch to ON.
      2. Enter the following menus: SETUP / Vehicle / Vehicle Customisation / Door Lock Settings.
      3. Select the setting by referring to the table below.
        Display Description Default Setting Relevant ECU
        Automatic Door Lock
        • By Shift from P: Function that locks all doors when the shift lever is moved out of P, with the ignition switch ON and all doors closed
        • By Speed: Function that locks all of the doors when the vehicle speed reaches a certain level
        By Shift from P By Speed, By Shift from P or Off Main body ECU (Multiplex network body ECU)
        Automatic Door Unlock
        • By Driver Door: Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the ignition switch being turned off
        • By Shift to P: Function that unlocks all doors when the shift lever is moved to P from any position other than P with the ignition switch ON
        By Shift to P By Shift to P, By Driver Door or Off Main body ECU (Multiplex network body ECU)