DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System - Service Information >> Brake Hold Switch >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    for HV Model: Refer to PROCEDURE - Step 1

    for Gasoline Model: Refer to PROCEDURE - Step 1

  2. REMOVE CONSOLE BOX CUSHION 

    Refer to PROCEDURE - Step 2

  3. REMOVE NO. 2 CONSOLE BOX CUSHION 

    Refer to PROCEDURE - Step 1

  4. REMOVE FRONT CONSOLE BOX COVER 

    Refer to PROCEDURE - Step 3

  5. REMOVE CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 5

  6. REMOVE BRAKE HOLD SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) 
    1. Disconnect the connector from the brake hold switch (electric parking brake switch assembly).
      GTY1113933Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 screws and brake hold switch (electric parking brake switch assembly) from the console panel sub-assembly.
Diesel-Data.com