DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - Service Information (1 Of 2) >> A25A-FXS Spark Plug >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

  1. INSTALL SPARK PLUG 

    HINT: 

    Perform "Inspection After Repair" after replacing a spark plug.

    Refer to INITIALIZATION [12/2019 - 10/2021] , or refer to INITIALIZATION [10/2021 - ]

    1. Install the 4 spark plugs to the cylinder head sub-assembly.

      Torque: 20 N.m (204 kgf/cm, 15 ft.lbf) 

      NOTE:

      If a spark plug has been struck or dropped, replace it.

      HINT: 

      Install the same parts to their original positions.

  2. INSTALL IGNITION COIL ASSEMBLY 

    Refer to PROCEDURE - Step 2

  3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 66 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 66 [10/2022 - 11/2023] , or refer to PROCEDURE - Step 64 [11/2023 - ]

  4. PERFORM INITIALIZATION 
    1. Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.

      Refer to INITIALIZATION [12/2019 - 10/2021] , or refer to INITIALIZATION [10/2021 - ]

Diesel-Data.com