DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - Service Information (1 Of 2) >> 2GR-FKS Spark Plug >> Installation [12/2019 - 10/2022] >> Procedure

Installation [12/2019 - 10/2022]: Procedure

  1. INSTALL SPARK PLUG 

    HINT: 

    Perform "Inspection After Repair" after replacing a spark plug.

    Refer to INITIALIZATION [12/2019 - 10/2022]

    1. Install the 6 spark plugs to the cylinder head sub-assembly and cylinder head LH.

      Torque: 18 N.m (184 kgf/cm, 13 ft.lbf) 

      NOTE:

      If a spark plug has been struck or dropped, replace it.

      HINT: 

      Install the same parts to their original positions.

  2. INSTALL IGNITION COIL ASSEMBLY 

    Refer to PROCEDURE - Step 2

  3. INSTALL INTAKE AIR SURGE TANK ASSEMBLY 

    Refer to INSTALLATION [12/2019 - 10/2022]

  4. PERFORM INITIALIZATION 
    1. Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.

      Refer to INITIALIZATION [12/2019 - 10/2022]

Diesel-Data.com