DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FKS) - Service Information >> Engine Coolant Temperature Sensor >> Installation [12/2019 - 10/2022] >> Procedure

Installation [12/2019 - 10/2022]: Procedure

  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR 

    HINT: 

    Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

    Refer to INITIALIZATION [12/2019 - 10/2022]

    1. Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.
      NOTE:

      If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.

    2. Install the engine coolant temperature sensor to the water outlet with the clip.
      NOTE:
      • If the engine coolant temperature sensor has been struck or dropped, replace it.
      • Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.
    3. Connect the engine coolant temperature sensor connector.
  2. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE 

    See step  3

  3. ADD ENGINE COOLANT 

    Refer to PROCEDURE - Step 2

  4. INSPECT FOR COOLANT LEAK 

    Refer to PROCEDURE - Step 1

  5. PERFORM INITIALIZATION 
    1. Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

      Refer to INITIALIZATION [12/2019 - 10/2022]

Diesel-Data.com