Installation [12/2019 - 10/2022]: Procedure

1. Install the No. 1 generator bracket to the generator assembly with the bolt.

   Torque: 20 N.m (204 kgf/cm, 15 ft.lbf) 

2. Install the wire harness clamp bracket with the bolt.

   Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

3. Install the generator assembly with the 2 bolts.

   Torque: 43 N.m (438 kgf/cm, 32 ft.lbf) 

4. Type A:
   1. Install the bolt.

      Torque: 20 N.m (204 kgf/cm, 15 ft.lbf) 

5. Type B:
   1. Install the nut.

      Torque: 20 N.m (204 kgf/cm, 15 ft.lbf) 

6. Engage the wire harness clamp.
7. Connect the compressor assembly with magnetic clutch connector.
8. Connect the generator assembly connector.
9. Connect the wire harness to terminal B with the nut.

   Torque: 12 N.m (122 kgf/cm, 9 ft.lbf) 

10. Close the terminal cap.

Refer to INSTALLATION [12/2019 - 10/2022]

Refer to INSTALLATION [12/2019 - 09/2020] , or refer to INSTALLATION [09/2020 - 10/2022]

Refer to PROCEDURE - Step 2