Installation [12/2019 - ]: Procedure

1. Secure the steering knuckle between aluminum plates in a vise.
   NOTE:

   Do not overtighten the vise.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Install the front axle hub sub-assembly and front disc brake dust cover to the steering knuckle with the 4 bolts.

   Torque: 120 N.m (1224 kgf/cm, 89 ft.lbf) 

   NOTE:

   • Be careful not to damage the speed sensor rotor or contact surfaces.
   • Do not allow foreign matter to contact the speed sensor rotor or contact surfaces.

Refer to PROCEDURE - Step 1

See step  2