DTC P0011-00: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1; DTC P0012-00: Camshaft Position "A" - Timing Over-Retarded Bank 1; DTC P0021-00: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 2; DTC P0022-00: Camshaft Position "A" - Timing Over-Retarded Bank 2 [12/2019 - 10/2022]: Procedure

1. Read the DTCs.

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   DTC P0011-00, P0012-00, P0021-00 or P0022-00 is output	A
   DTC P0011-00, P0012-00, P0021-00 or P0022-00 and other DTCs are output	B

   HINT: 

   If any DTCs other than P0011-00, P0012-00, P0021-00 or P0022-00 are output, troubleshoot those DTCs first.

Result: 

B 

GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [12/2019 - 09/2020]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [09/2020 - 10/2021]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2021 - 10/2022] 

Result: 

A 

See step  2

1. Start the engine.
2. Read the Data List while performing the Active Test with the engine idling.

   Powertrain > Engine > Active Test 

   Active Test Display
   Control the Intake VVT OCV Duty Ratio Bank 1

   Data List Display
   Intake VVT Change Angle Bank 1

   Powertrain > Engine > Active Test 

   Active Test Display
   Control the Intake VVT OCV Duty Ratio Bank 2

   Data List Display
   Intake VVT Change Angle Bank 2

   OK

   GTS Operation	Data List (Intake VVT Change Angle Bank 1 or Bank 2)
   -100% to 100%	Varies by 70 DegFR or more

   Result

   Proceed to
   OK
   NG

Result: 

NG 

See step  5

Result: 

OK 

See step  3

1. Clear the DTCs.

   Powertrain > Engine > Clear DTCs 

2. Turn the ignition switch off and wait for at least 30 seconds.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  4

1. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
2. Read the DTCs.

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTC P0011-00, P0012-00, P0021-00 or P0022-00 is output	B

   HINT: 

   DTC P0011-00, P0012-00, P0021-00 or P0022-00 may be stored when foreign matter in the engine oil is caught in some parts of the system. The DTC will remain stored even if the system returns to normal after a short time. That foreign matter may then be captured by the oil filter.

Result: 

A 

CHECK FOR INTERMITTENT PROBLEMS. Refer to  CHECK FOR INTERMITTENT PROBLEMS [12/2019 - 10/2022] 

Result: 

B 

See step  5

Refer to INSPECTION [12/2019 - 10/2022]

Result

Result: 

NG 

See step  12

Result: 

OK 

See step  6

• for Bank 1: Refer to INSPECTION [12/2019 - 10/2022]
• for Bank 2: Refer to INSPECTION [12/2019 - 10/2022]

Result

Result: 

NG 

See step  14

Result: 

OK 

See step  7

1. Remove the cylinder head cover sub-assembly and cylinder head cover sub-assembly LH.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Timing Mark	*b	TDC Timing Mark
   *c	Groove	-	-

2. Turn the crankshaft pulley and align its groove with the TDC timing mark of the timing chain cover.
3. Check that the timing marks of the camshaft timing gear assemblies and camshaft timing exhaust gear assemblies are aligned with the timing marks of the bearing cap as shown in the illustration.

   HINT: 

   If the timing marks are not as shown, turn the crankshaft one revolution clockwise.

   OK

   Timing marks on camshaft timing gear assemblies and camshaft timing exhaust gear assemblies are aligned as shown in the illustration.

   HINT: 

   If the result is not as specified, check for mechanical malfunctions that may have affected the valve timing, such as a jumped tooth or stretching of the timing chain.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

See step  9

Result: 

OK 

See step  8

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the oil control valve filter (for intake camshaft of bank 1) or oil control valve filter (for intake camshaft of bank 2).
   • for Bank 1: Refer to PROCEDURE - Step 52
   • for Bank 2: Refer to PROCEDURE - Step 58
2. Check that the filter is not clogged.

   OK

   Filter is not clogged.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

See step  16

Result: 

NG 

REPLACE OIL CONTROL VALVE FILTER (FOR INTAKE CAMSHAFT) 

• for Bank 1: Refer to PROCEDURE - Step 52
• for Bank 2: Refer to PROCEDURE - Step 58

1. Check for mechanical malfunctions that affect the valve timing, such as a jumped tooth or stretching of the timing chain.

   HINT: 

   Perform "Inspection After Repair" after repairing or replacing the engine mechanical system.

   Refer to INITIALIZATION [12/2019 - 10/2022]

   Result

   Proceed to
   OK
   NG

Result: 

NG 

REPAIR OR REPLACE MALFUNCTIONING PARTS, COMPONENT AND AREA 

Result: 

OK 

See step  10

1. Clear the DTCs.

   Powertrain > Engine > Clear DTCs 

2. Turn the ignition switch off and wait for at least 30 seconds.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  11

1. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
2. Read the DTCs.

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTC P0011-00, P0012-00, P0021-00 or P0022-00 is output	B

Result: 

A 

CHECK FOR INTERMITTENT PROBLEMS. Refer to  CHECK FOR INTERMITTENT PROBLEMS [12/2019 - 10/2022] 

Result: 

B 

REPLACE ECM. Refer to  REMOVAL [12/2019 - 09/2020]  , or refer to  REMOVAL [09/2020 - 10/2022] 

Refer to REMOVAL [12/2019 - 10/2022]

Result

Result: 

NEXT 

See step  13

• for Bank 1: Refer to INSPECTION [12/2019 - 10/2022]
• for Bank 2: Refer to INSPECTION [12/2019 - 10/2022]

Result

Result: 

OK 

See step  15

Result: 

NG 

See step  14

• for Bank 1: Refer to REMOVAL [12/2019 - 10/2022]
• for Bank 2: Refer to REMOVAL [12/2019 - 10/2022]

Result

Result: 

NEXT 

See step  15

1. Start the engine.
2. Read the Data List while performing the Active Test with the engine idling.

   Powertrain > Engine > Active Test 

   Active Test Display
   Control the Intake VVT OCV Duty Ratio Bank 1

   Data List Display
   Intake VVT Change Angle Bank 1

   Powertrain > Engine > Active Test 

   Active Test Display
   Control the Intake VVT OCV Duty Ratio Bank 2

   Data List Display
   Intake VVT Change Angle Bank 2

   OK

   GTS Operation	Data List (Intake VVT Change Angle Bank 1 or Bank 2)
   -100% to 100%	Varies by 70 DegFR or more

   Result

   Proceed to
   OK
   NG

Result: 

OK 

END 

Result: 

NG 

See step  16

Refer to REMOVAL [12/2019 - 10/2022]

HINT: 

Perform "Inspection After Repair" after replacing the camshaft timing gear assembly.

Refer to INITIALIZATION [12/2019 - 10/2022]

Result

Result: 

NEXT 

See step  17

1. Clear the DTCs.

   Powertrain > Engine > Clear DTCs 

2. Turn the ignition switch off and wait for at least 30 seconds.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  18

1. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
2. Read the DTCs.

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTC P0011-00, P0012-00, P0021-00 or P0022-00 is output	B

Result: 

A 

END 

Result: 

B 

REPLACE ECM. Refer to  REMOVAL [12/2019 - 09/2020]  , or refer to  REMOVAL [09/2020 - 10/2022]