DTC P0011-00: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 [11/2023 - ]: Procedure

1. Read the DTCs.

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   DTC P0011-00 is output	A
   DTC P0011-00 and other DTCs are output	B

   HINT: 

   If any DTCs other than P0011-00 are output, troubleshoot those DTCs first.

Result: 

B 

GO TO DTC CHART  . Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2023 - 11/2024] , or refer to DIAGNOSTIC TROUBLE CODE CHART [11/2024 - ]

Result: 

A 

See step  2

Refer to PROCEDURE - Step 33

HINT: 

Perform "Inspection After Repair" after replacing the camshaft timing gear assembly.

Refer to INITIALIZATION [10/2021 - ]

Result

Result: 

NEXT 

See step  3

1. Remove the EFI NO. 1 fuse from the No. 1 engine room relay block and No. 1 junction block assembly and wait for at least 60 seconds.

   HINT: 

   Clear the DTC without using the GTS.

2. Reinstall the EFI NO. 1 fuse.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  4

1. Drive the vehicle in accordance with the driving pattern described in the Confirmation Driving Pattern.
2. Read the DTCs.

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTC P0011-00 is output	B

Result: 

A 

END 

Result: 

B 

REPLACE ECM 

Refer to REMOVAL [11/2023 - ]