DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Lubrication System (A25A-FXS) - Service Information) >> Oil Pump >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL ENGINE BALANCER ASSEMBLY 

    Refer to PROCEDURE - Step 6 [12/2019 - 10/2021] , or refer to PROCEDURE - Step 6 [10/2021 - 11/2023] , or refer to PROCEDURE - Step 6 [11/2023 - ]

  2. INSTALL STIFFENING CRANKCASE ASSEMBLY 

    Refer to PROCEDURE - Step 7 [12/2019 - 10/2021] , or refer to PROCEDURE - Step 7 [10/2021 - 11/2023] , or refer to PROCEDURE - Step 7 [11/2023 - ]

  3. INSTALL OIL PUMP ASSEMBLY 
    1. Install the oil pump assembly to the stiffening crankcase assembly with the 3 bolts.

      Torque: 24 N.m (245 kgf/cm, 18 ft.lbf) 

  4. INSTALL OIL PUMP BRACKET 

    Refer to PROCEDURE - Step 9 [12/2019 - 10/2021] , or refer to PROCEDURE - Step 9 [10/2021 - 11/2023] , or refer to PROCEDURE - Step 9 [11/2023 - ]

  5. INSTALL ENGINE OIL LEVEL SENSOR 

    See step  1

  6. INSTALL OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11 [12/2019 - 10/2021] , or refer to PROCEDURE - Step 11 [10/2021 - 11/2023] , or refer to PROCEDURE - Step 11 [11/2023 - ]

  7. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 12 [12/2019 - 10/2021] , or refer to PROCEDURE - Step 12 [10/2021 - 11/2023] , or refer to PROCEDURE - Step 12 [11/2023 - ]

  8. INSTALL TIMING CHAIN COVER ASSEMBLY 

    Refer to INSTALLATION [12/2019 - 10/2021] , or refer to INSTALLATION [10/2021 - ]

Diesel-Data.com