DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 96 (Motor Generator Control System (AWD) - Diagnostic Codes (3 Of 5)) >> MOTOR GENERATOR CONTROL SYSTEM (for AWD) >> DTC P0C19-00: Drive Motor "A" Execution Torque Performance [12/2019 - 11/2023] >> Description

DTC P0C19-00: Drive Motor "A" Execution Torque Performance [12/2019 - 11/2023]: Description

WARNING: This page is about a different variant/trim than selected.

For a description of the inverter.

Refer to DESCRIPTION

A DTC is stored when the actual motor torque deviates from the motor torque requested by the hybrid vehicle control ECU.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P0C19-00 Drive Motor "A" Execution Torque Performance Motor (MG2) torque execution monitoring malfunction:
The difference between the motor torque requested by the motor generator control ECU and actual motor torque is large.
(1 trip detection logic)
  • Inverter with converter assembly
  • Motor cable
  • HV floor under wire (rear traction motor cable)
  • Hybrid vehicle transaxle assembly
  • Rear traction motor with transaxle assembly
  • Hybrid vehicle control ECU
  • Wire harness or connector
Comes on Master Warning:
Comes on
RELATED DATA LIST

DTC No. Data List
P0C19-00
  • Motor Torque
  • Target Motor Torque (Hybrid control system)
  • Vehicle Speed