DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (Automatic Transmission System (UA80E) - Service Information (1 Of 2)) >> Pattern Select Switch >> Installation [12/2019 - 10/2022] >> Procedure

Installation [12/2019 - 10/2022]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL NO. 1 PATTERN SELECT SWITCH ASSEMBLY 
    1. Install the No. 1 pattern select switch assembly to the console panel sub-assembly with the 4 screws.
    2. Engage the clamp.
    3. Connect the No. 1 pattern select switch assembly connector.
  2. INSTALL SNOW SWITCH (PATTERN SELECT SWITCH) 
    1. Engage the 2 claws to install the snow switch (pattern select switch) to the console panel sub-assembly.
    2. Connect the snow switch (pattern select switch) connector.
  3. INSTALL CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 9

  4. INSTALL FRONT CONSOLE BOX COVER 

    Refer to PROCEDURE - Step 11

  5. INSTALL NO. 2 CONSOLE BOX CUSHION 

    Refer to PROCEDURE - Step 13

  6. INSTALL CONSOLE BOX CUSHION 

    Refer to PROCEDURE - Step 12

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 

    See step  1

Diesel-Data.com