DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2GR-FKS) - Diagnostic Codes (1 Of 6) >> SFI System >> DTC P0100-64: Mass or Volume Air Flow Sensor "A" Signal Plausibility Failure [12/2019 - 10/2022] >> Procedure

DTC P0100-64: Mass or Volume Air Flow Sensor "A" Signal Plausibility Failure [12/2019 - 10/2022]: Procedure

  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0100-64) 
    1. Read the DTCs.

      Powertrain > Engine > Trouble Codes 

      Result

      Result Proceed to
      DTC P0100-64 is output A
      DTC P0100-64 and other DTCs are output B

      HINT: 

      If any DTCs other than P0100-64 are output, troubleshoot those DTCs first.

    Result: 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [12/2019 - 09/2020]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [09/2020 - 10/2021]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2021 - 10/2022] 

    Result: 

    See step  2

  2. CHECK INTAKE SYSTEM 
    1. Check the intake system for vacuum leaks.

      Refer to ON-VEHICLE INSPECTION [12/2019 - 10/2022]

      OK

      No leaks from the intake system.

      HINT: 

      Perform "Inspection After Repair" after repairing or replacing the intake system.

      Refer to INITIALIZATION [12/2019 - 10/2022]

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    REPAIR OR REPLACE INTAKE SYSTEM 

    Result: 

    OK 

    See step  3

  3. CHECK PCV HOSE CONNECTIONS 

    Refer to COMPONENTS [12/2019 - 10/2022]

    OK

    PCV valve and hose are connected correctly and are not damaged.

    Result

    Proceed to
    OK
    NG

    Result: 

    NG 

    REPAIR OR REPLACE PCV HOSE 

    Result: 

    OK 

    See step  4

  4. REPLACE MASS AIR FLOW METER SUB-ASSEMBLY 

    Refer to REMOVAL [12/2019 - 10/2022]

    HINT: 

    Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

    Refer to INITIALIZATION [12/2019 - 10/2022]

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  5

  5. CLEAR DTC 
    1. Clear the DTCs.

      Powertrain > Engine > Clear DTCs 

    2. Turn the ignition switch off and wait for at least 30 seconds.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  6

  6. CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED 
    1. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
    2. Check the DTC judgment result.

      Powertrain > Engine > Utility 

      Tester Display
      All Readiness
      GTS Display Description
      NORMAL
      • DTC judgment completed
      • System normal
      ABNORMAL
      • DTC judgment completed
      • System abnormal
      INCOMPLETE
      • DTC judgment not completed
      • Perform driving pattern after confirming DTC enabling conditions
    3. Input the DTC: P0100-64.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    END