DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System (2GR-FKS) - Service Information >> Fuel Pump Ecu >> Installation [12/2019 - 10/2022] >> Procedure

Installation [12/2019 - 10/2022]: Procedure

  1. INSTALL FUEL PUMP CONTROL ECU BRACKET 
    1. Install the fuel pump control ECU bracket to the fuel pump control ECU with the 2 bolts.

      Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

  2. INSTALL FUEL PUMP CONTROL ECU 
    1. Install the fuel pump control ECU to the vehicle body with the 2 nuts.

      Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

      NOTE:

      Do not reuse the fuel pump control ECU if it has been dropped or subjected to a severe impact.

    2. Connect the 2 fuel pump control ECU connectors.
  3. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (w/ Woofer) 

    Refer to PROCEDURE - Step 1

  4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH 

    Refer to PROCEDURE - Step 23

  5. INSTALL ROPE HOOK 

    Refer to PROCEDURE - Step 24

  6. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK 

    Refer to PROCEDURE - Step 25

  7. INSTALL DECK TRIM POCKET COVER 

    Refer to PROCEDURE - Step 26

  8. INSTALL NO. 2 DECK SIDE TRIM COVER 

    Refer to PROCEDURE - Step 28

  9. INSTALL FRONT DECK SIDE TRIM COVER LH 

    Refer to PROCEDURE - Step 30

  10. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH 

    Refer to PROCEDURE - Step 1

  11. INSTALL REAR DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 47

  12. INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH 

    Refer to PROCEDURE - Step 48

  13. INSTALL REAR FLOOR FINISH PLATE 

    Refer to PROCEDURE - Step 65

  14. INSTALL REAR NO. 2 SEAT ASSEMBLY 

    Refer to INSTALLATION [12/2019 - ]

Diesel-Data.com