DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Accessory Drive Belts >> Engine Mechanical System (2GR-FKS) - Service Information (1 Of 2) >> Front Crankshaft Oil Seal >> Removal [12/2019 - 10/2022] >> Procedure

Removal [12/2019 - 10/2022]: Procedure

  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE 

    Refer to REMOVAL [12/2019 - 09/2020] , or refer to REMOVAL [09/2020 - 10/2022] 

  2. REMOVE V-RIBBED BELT 

    Refer to PROCEDURE - Step 3

  3. REMOVE CRANKSHAFT PULLEY 
    1. Using SST to hold the crankshaft pulley, loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.
      GTY651566Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Hold
      Turn
      • SST: 09213-70011 
        1. 09213-70020
      • SST: 09330-00021 
    2. Using SST, remove the crankshaft pulley set bolt and crankshaft pulley.
      GTY621276Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Hold
      Turn
      • SST: 09950-50013 
        1. 09951-05010
        2. 09952-05010
        3. 09953-05020
        4. 09954-05021
  4. REMOVE TIMING CHAIN CASE OIL SEAL 
    1. Using a screwdriver with its tip wrapped with protective tape, pry out the timing chain case oil seal.
      GTY625866Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
      NOTE:

      After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

Diesel-Data.com