DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Electrical >> Starter >> Stop And Start System - Service Information >> Engine Stop And Start Ecu >> Installation [11/2023 - ] >> Procedure

Installation [11/2023 - ]: Procedure

  1. INSTALL ENGINE STOP AND START ECU 
    1. Engage the 2 claws and install the engine stop and start ECU to the ECU integration box LH.
      NOTE:

      Make sure that the engine stop and start ECU is securely installed.

      GTY940403Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ECU INTEGRATION BOX LH 
    1. Install the ECU integration box LH with the 2 bolts and nut.
    2. Connect the 3 engine stop and start ECU connectors.
    3. Connect each connector.
  3. INSTALL ENGINE STOP & START SOLENOID FILTER 

    See step  1

  4. INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 3

  5. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    Refer to INSTALLATION [11/2023 - ]

  6. PERFORM INITIALIZATION 

    Refer to WORK PROCEDURE [11/2023 - ]

  7. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL 

    HINT: 

    When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

    Refer to AUTOMATIC LEARNING CHART [11/2023 - ]

Diesel-Data.com