DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Electrical >> Starter >> Stop And Start System - Service Information >> Backup Boost Converter >> Removal [09/2020 - 10/2022] >> Procedure

Removal [09/2020 - 10/2022]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 1

  2. REMOVE FRONT BUMPER ASSEMBLY 
  3. REMOVE ECO RUN VEHICLE CONVERTER ASSEMBLY 
    1. Move the lock lever as shown in the illustration and disconnect the eco run vehicle converter assembly connector.
      GTY873637Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Lock Lever
    2. Remove the bolt, nut and eco run vehicle converter assembly.
      GTY902775Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 1 CONVERTER CONTROL BRACKET 
    1. Remove the 2 bolts and No. 1 converter control bracket from the eco run vehicle converter assembly.
      GTY902774Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Diesel-Data.com