DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (W/ Stop And Start System) (2GR-FKS) - Service Information >> STARTER (w/ Stop And Start System) >> Removal [09/2020 - 10/2022] >> Procedure

Removal [09/2020 - 10/2022]: Procedure

  1. REMOVE BATTERY 

    Refer to REMOVAL [12/2019 - 10/2022]

  2. REMOVE COOL AIR INTAKE DUCT SEAL 
  3. REMOVE INLET AIR CLEANER ASSEMBLY 

    Refer to PROCEDURE - Step 24

  4. REMOVE AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE 

    Refer to PROCEDURE - Step 25

  5. REMOVE ECM 

    Refer to PROCEDURE - Step 5

  6. REMOVE BATTERY CLAMP SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 30

  7. REMOVE STARTER ASSEMBLY 
    1. Disconnect the 2 starter assembly connectors.
      GTY936905Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the wire harness clamp.
    3. Open the terminal cap.
    4. Remove the nut and disconnect the engine wire from the terminal 30.
    5. Type A:
      GTY886929Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 2 bolts and starter assembly.
    6. Type B:
      GTY886926Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 2 nuts.
      2. Using an E8 "TORX" socket wrench, remove the 2 stud bolts and starter assembly.
    7. Remove the wire harness clamp.
      GTY888257Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Diesel-Data.com