Removal [12/2019 - 10/2022]: Procedure

1. Using a moulding remover, disengage the 2 claws and guide as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Insert Moulding Remover Here
   	Remove in this Direction

2. Disengage the 2 claws and 2 guides to remove the rear combination light cover as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

1. Apply protective tape around the rear combination light sub-assembly as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Protective Tape

2. Remove the 2 screws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. Pull the rear combination light sub-assembly toward the rear of the vehicle as shown in the illustration to disengage the pin and 3 guides and separate the rear combination light sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Pin
   *b	Guide
   	Remove in this Direction

   NOTE:

   To prevent the rear combination light sub-assembly from falling when disengaging the pin and 3 guides, make sure to hold the rear combination light sub-assembly.

4. Disengage the 2 guides.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

5. Disconnect 3 connectors to remove the rear combination light sub-assembly.

Refer to REMOVAL [12/2019 - 09/2020] , or refer to REMOVAL [09/2020 - 10/2022]

Refer to PROCEDURE - Step 15 [12/2019 - 09/2020] , or refer to PROCEDURE - Step 22 [09/2020 - 10/2022]

1. Disconnect the connector to remove the rear combination light cord.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002