DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio / Video System - Service Information >> Radio Antenna Cord >> Removal [11/2023 - 11/2024] >> Procedure

Removal [11/2023 - 11/2024]: Procedure

  1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to REMOVAL [11/2023 - ]

  2. REMOVE NO. 4 HEATER TO REGISTER DUCT 

    Refer to PROCEDURE - Step 1

  3. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/ Navigation Antenna) 
    1. for Antenna Cord Sub-assembly without Branch Line:
      1. Disconnect the connector and disengage the 2 claws.
        GTY917592Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *A w/ Navigation ECU - -
      2. Disengage each clamp and remove the No. 2 antenna cord sub-assembly.
    2. for Antenna Cord Sub-assembly with Branch Line:
      1. Disconnect the connector and disengage the 2 claws.
        GTY916390Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Disengage each clamp and remove the No. 2 antenna cord sub-assembly.
  4. REMOVE ANTENNA CORD SUB-ASSEMBLY 
    1. for 12.3 Inch Display:
      1. Disengage the 2 clamps.
        GTY916388Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage each clamp and remove the antenna cord sub-assembly.
      GTY857104Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for Antenna Cord Sub-assembly with Branch Line - -
  5. REMOVE ROOF HEADLINING ASSEMBLY 

    Refer to REMOVAL [10/2022 - ]

  6. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY (for Normal Roof) 
    1. Remove the adhesive tape from the roof headlining assembly.
      GTY1120746Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Adhesive Tape - -
    2. Remove the No. 3 antenna cord sub-assembly from the roof headlining assembly.
  7. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY (for Moon Roof) 
    1. Remove the adhesive tape from the roof headlining assembly.
      GTY1121759Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A w/ Rear Seat Entertainment System - -
      Adhesive Tape - -
    2. Remove the No. 3 antenna cord sub-assembly from the roof headlining assembly.
  8. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY (for Panoramic Moon Roof) 
    1. Remove the adhesive tape from the roof headlining assembly.
      GTY1122197Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Adhesive Tape - -
    2. Remove the No. 3 antenna cord sub-assembly from the roof headlining assembly.
  9. REMOVE NO. 4 ANTENNA CORD SUB-ASSEMBLY 
    1. Disconnect the connector.
      GTY940439Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A w/ Manual (SOS) Switch
    2. Disengage each clamp and remove the No. 4 antenna cord sub-assembly.
Diesel-Data.com