DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information >> Navigation Ecu >> Installation [12/2019 - 10/2022] >> Procedure

Installation [12/2019 - 10/2022]: Procedure

  1. INSTALL NAVIGATION ECU 
  2. INSTALL NO. 4 RADIO RECEIVER BRACKET 
    1. Install the No. 4 radio receiver bracket with the 2 screws.
  3. INSTALL NO. 3 RADIO RECEIVER BRACKET 
    1. Install the No. 3 radio receiver bracket with the 2 screws.
  4. INSTALL ANTENNA CORD SUB-ASSEMBLY 
    1. Engage the 2 clamps to install the antenna cord sub-assembly.
    2. Connect the connector.
  5. INSTALL RADIO WIRING SUB-ASSEMBLY 
    1. Connect the connector to install the radio wiring sub-assembly.
  6. INSTALL NAVIGATION ECU WITH BRACKET 
    1. Connect each connector.
    2. Install the navigation ECU with bracket with the 2 nuts.
    3. Engage the clamp.
    4. Connect the connector.
  7. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (w/ Manual (SOS) Switch) 

    Refer to PROCEDURE - Step 4

  8. INSTALL FRONT CONSOLE BOX INSERT 

    Refer to PROCEDURE - Step 4

  9. INSTALL FRONT NO. 2 CONSOLE BOX INSERT 

    Refer to PROCEDURE - Step 5

  10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 6

  11. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

  12. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 15

  13. INSTALL INSTRUMENT PANEL FINISH END PANEL RH 

    Refer to PROCEDURE - Step 16

  14. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 1

  15. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 51

  16. INSTALL FRONT DOOR SCUFF PLATE RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 52

  17. INSTALL NO. 1 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 26

  18. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 29

  19. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 51

  20. INSTALL FRONT DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 52

  21. INSTALL CONSOLE BOX ASSEMBLY 

    Refer to INSTALLATION [12/2019 - 10/2022]

Diesel-Data.com