Installation [12/2019 - 10/2022]: Procedure

1. Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly.
2. Install the front lower No. 1 suspension arm sub-assembly to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.
   Fig 1: Front Lower No. 1 Suspension Arm Sub-Assembly Bolts And Nut Tightening Sequence

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Bolt (1), (2) 

   Torque: 200 N.m (2039 kgf/cm, 148 ft.lbf) 

   Bolt (3) 

   Torque: 135 N.m (1377 kgf/cm, 100 ft.lbf) 

   NOTE:

   Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

3. Connect the front lower No. 1 suspension arm sub-assembly to the front lower ball joint assembly with the bolt and 2 nuts.

   Torque: 92 N.m (938 kgf/cm, 68 ft.lbf) 

for A25A-FXS: Refer to PROCEDURE - Step 60

for 2GR-FKS: Refer to PROCEDURE - Step 74 [12/2019 - 09/2020] , or refer to PROCEDURE - Step 74 [09/2020 - 10/2022]

for A25A-FXS: Refer to PROCEDURE - Step 26

for 2GR-FKS: Refer to PROCEDURE - Step 77 [12/2019 - 09/2020] , or refer to PROCEDURE - Step 77 [09/2020 - 10/2022]

Refer to PROCEDURE - Step 62

Refer to PROCEDURE - Step 79 [12/2019 - 09/2020] , or refer to PROCEDURE - Step 79 [09/2020 - 10/2022]

for A25A-FXS: Refer to PROCEDURE - Step 63

for 2GR-FKS: Refer to PROCEDURE - Step 80 [12/2019 - 09/2020] , or refer to PROCEDURE - Step 80 [09/2020 - 10/2022]

for A25A-FXS: Refer to PROCEDURE - Step 64

for 2GR-FKS: Refer to PROCEDURE - Step 81 [12/2019 - 09/2020] , or refer to PROCEDURE - Step 81 [09/2020 - 10/2022]

for A25A-FXS: Refer to PROCEDURE - Step 65

for 2GR-FKS: Refer to PROCEDURE - Step 82 [12/2019 - 09/2020] , or refer to PROCEDURE - Step 82 [09/2020 - 10/2022]

Refer to PROCEDURE - Step 1

Refer to ADJUSTMENT [12/2019 - 09/2020] , or refer to ADJUSTMENT [09/2020 - 10/2022]