Removal [10/2022 - 11/2023]: Procedure

PRECAUTION
NOTE:
- Make sure to read the precautions of the electric parking brake system before removing the rear brake assembly.
  for HV Model: Refer to PRECAUTION [10/2022 - 11/2023]
  
  for Gasoline Model: Refer to PRECAUTION [10/2022 - 11/2023]
REMOVE REAR WHEEL
See step 1
PERFORM REAR BRAKE PAD REPLACEMENT MODE
for HV Model: Refer to TEST MODE PROCEDURE [12/2019 - ]

for Gasoline Model: Refer to TEST MODE PROCEDURE [12/2019 - ]
DISABLE BRAKE CONTROL (for HV Model)
Refer to PROCEDURE - Step 4
DISCONNECT NO. 2 PARKING BRAKE WIRE ASSEMBLY
Refer to PROCEDURE - Step 4

SEPARATE REAR FLEXIBLE HOSE

Remove the 2 bolts and separate the rear flexible hose.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

SEPARATE REAR DISC BRAKE CYLINDER ASSEMBLY

Hold the 2 rear disc brake cylinder slide pins and remove the 2 bolts and separate the rear disc brake cylinder assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Turn
*b	Hold

REMOVE REAR DISC BRAKE PAD

WARNING:

Be careful not to get pinched by the rear disc brake cylinder assembly or other parts when removing the rear disc brake pads.

Remove the 2 rear disc brake pads from the rear disc brake cylinder mounting.

REMOVE REAR DISC BRAKE ANTI-SQUEAL SHIM KIT

Remove the rear No. 1 disc brake anti-squeal shim and rear No. 2 disc brake anti-squeal shim from each rear disc brake pad.

*1	Rear No. 1 Disc Brake Anti-squeal Shim
*2	Rear No. 2 Disc Brake Anti-squeal Shim

Remove the rear disc brake pad wear indicator plate from each rear disc brake pad.