DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Network Gateway Ecu - Service Information >> Network Gateway Ecu >> Installation [11/2023 - ] >> Procedure

Installation [11/2023 - ]: Procedure

  1. INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) 
    1. Engage the 2 claws to install the central gateway ECU (network gateway ECU) as shown in the illustration.
      GTY1178819Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
      NOTE:

      Make sure that the central gateway ECU (network gateway ECU) is securely installed.

  2. INSTALL ECU INTEGRATION BOX RH 
    1. Install the ECU integration box RH with the bolt and nut.
    2. Engage the 2 clamps.
    3. Connect each connector.
  3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 15

  5. INSTALL INSTRUMENT PANEL FINISH END PANEL RH 

    Refer to PROCEDURE - Step 16

  6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH 

    Refer to PROCEDURE - Step 1

  7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 49

  8. INSTALL FRONT DOOR SCUFF PLATE RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 50

  9. UPDATE ECU SECURITY KEY 

    Refer to UPDATE ECU SECURITY KEY [11/2023 - ]

Diesel-Data.com