DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Body Panels / Trim - Service Information (1 Of 2) >> Front Console Box >> Disassembly [10/2022 - ] >> Procedure

Disassembly [10/2022 - ]: Procedure

  1. REMOVE REAR CONSOLE COVER 
    1. Disengage the 6 clips as shown in the illustration to remove the rear console cover.
      GTY932693Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  2. REMOVE NO. 2 AIR CONDITIONING CONTROL ASSEMBLY 

    Refer to PROCEDURE - Step 4

  3. REMOVE CONSOLE REAR END PANEL 
    1. Disengage the clamp.
      GTY907616Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Apply protective tape to the area shown in the illustration.
      GTY862933Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape
    3. Using a moulding remover, disengage the clip as shown in the illustration.
      GTY878420Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    4. Using a moulding remover, disengage the clip as shown in the illustration.
      GTY901678Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    5. Disengage the 6 clips as shown in the illustration to remove the console rear end panel.
      GTY896570Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  4. REMOVE NO. 2 POWER OUTLET SOCKET ASSEMBLY 

    Refer to PROCEDURE - Step 6

  5. REMOVE NO. 2 POWER OUTLET SOCKET COVER 

    Refer to PROCEDURE - Step 7

  6. REMOVE NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY 

    Refer to PROCEDURE - Step 8

  7. REMOVE CONSOLE BOX POCKET (w/ Console Box Pocket) 
    1. Remove the console box pocket.
      GTY898211Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE UPPER CONSOLE DOOR SUB-ASSEMBLY 
    1. Remove the 2 screws.
      GTY898439Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. While slightly pulling areas (A) and (B) in the direction shown in the illustration to enable the upper console door sub-assembly to pass over the stoppers, pull the upper console door sub-assembly in the direction shown in the illustration to remove it.
      GTY874267Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Stopper
      Pull
      Remove in this Direction
      NOTE:

      To prevent damage to the console box assembly, do not pull it excessively.

      HINT: 

      2 persons are required for this procedure.

  9. REMOVE REAR CONSOLE BOX WIRE 
    1. Disengage the 4 clips.
      GTY898345Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 3 guides as shown in the illustration to remove the No. 1 box panel.
      GTY915480Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    3. Disengage the 4 clips.
      GTY939434Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the 3 guides as shown in the illustration to remove the No. 3 box panel.
      GTY857334Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    5. Disengage the 2 clamps.
      GTY898431Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. Disengage the 6 claws as shown in the illustration to remove the No. 2 console mounting retainer.
      GTY898238Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    7. Remove the 6 screws.
      GTY898428Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    8. Disengage the clamp and guide to remove the No. 1 trash box retainer support.
      GTY905694Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Clamp
      *b Guide
    9. Disengage the 3 clamps to remove the rear console box wire.
      GTY898430Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Diesel-Data.com