DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (Hybrid Battery Control System - Service Information (2 Of 2)) >> Combination Switch >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL DRIVE MODE SELECT SWITCH (NO. 1 PATTERN SELECT SWITCH ASSEMBLY) 
    1. Install the drive mode select switch (No. 1 pattern select switch assembly) to the console panel sub-assembly with the 4 screws.
    2. Engage the clamp.
    3. Connect the drive mode select switch (No. 1 pattern select switch assembly) connector.
  2. INSTALL TRAIL SWITCH (PATTERN SELECT SWITCH) 
    1. Engage the 2 claws to install the trail switch (pattern select switch) to the console panel sub-assembly.
    2. Connect the trail switch (pattern select switch) connector.
  3. INSTALL EV DRIVE MODE SWITCH (PATTERN SELECT SWITCH ASSEMBLY) 
    1. Engage the 2 claws to install the EV drive mode switch (pattern select switch assembly) to the console panel sub-assembly.
    2. Connect the EV drive mode switch (pattern select switch assembly) connector.
  4. INSTALL CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 9 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 9 [10/2022 - ]

  5. INSTALL FRONT CONSOLE BOX COVER 

    Refer to PROCEDURE - Step 11 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 11 [10/2022 - ]

  6. INSTALL NO. 2 CONSOLE BOX CUSHION 

    Refer to PROCEDURE - Step 13 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 13 [10/2022 - ]

  7. INSTALL CONSOLE BOX CUSHION 

    Refer to PROCEDURE - Step 12 [12/2019 - 10/2022] , or refer to PROCEDURE - Step 12 [10/2022 - ]

  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to INSTALLATION [12/2019 - ]

Diesel-Data.com